Fresco Renders
Fresco Textures
Fresco White Set
Why Fresco?
Textures & Finishes
Renders & Textures
Fresco Colours
Durability
About Us
Contact Us

 

Features

Fresco render dry mix thin section light-weight cement render and skim coats are precision-blended polymer modified cement renders, suitable for all interior and exterior professional masonry wall rendering and patching requirements. Fresco Renders are manufactured to stringent quality standards, from the highest quality raw materials available. Fresco Renders composition is made up of 800 micron sand, hydrated lime, various proprietary additives and strengthing fibres combined with premium grade cement, all of which are blended to accurate specifications to ensure product performance and reliability.

Benefits


  • Ease of application
  • Excellent adhesion
  • No hairline cracking
  • Stronger than traditional cement renders
  • Can be applied by pump or trowel
  • Inbuilt water repellant properties
  • Excellent durability
  • Excellent abrasion resistance

Fresco Renders are suitable for use on:

  • Concrete brick and block walls
  • Concrete tilt panel walls
  • Clay bricks
  • AAC panels and block walls
  • Fibre Cement Sheet
  • Previously painted

Directions


  • All surfaces must be clean, sound and free from contaminants
  • Priming is recommended with Fresco Primer
  • Can be mixed by mechanical mixer or with the traditional concrete mixer
  • Mix one (1) bag of Fresco Render to 2.75 – 3.75 litres of water
  • Add the powder to the water steadily and mix with a power stirrer until the consistency is smooth and lump free
  • Allow the mix to stand for 5 minutes before use or before adjusting consistency if required
  • Apply build coat up to 5mm then skim coat 2-3mm, float finish
  • Minimum application 1.5mm

Technical Data


  • Appearance: Powder, light grey with slight odour
  • Application: Hawk & trowel, hopper gun, spray machine, projection pump
  • Bulk Density: 1400 – 1500 kg/m³
  • Practice Size: <1mm
  • Flammability: Not applicable
  • Solubility in water: Slight, hardens on mixing with water
  • Render Re-coat: 24 hrs
  • Top Coat : Min 48hrs

Thickness
mm
Coverage
Area M²(SqM)
Quantity
kg
3 2.6 to 3 20
6 1.3 to 1.5 20
10 0.8 to 0.9 20

FOR ANY TECHNICAL ADVICE PLEASE CONTACT US ON:

Tel: +64 09 415 8099
Fax: +64 09 415 8036
Email: info@fresco.net.nz
Website: www.fresco.net.nz
23 Schnapper Rock Road, Albany, Auckland

M.S.D.S. AVAILABLE ON REQUEST