| |
|
|
 |
|
|
Features
|
|
Fresco Texture coats are extremely durable, multi-textured acrylic coating. It can be tinted to your desired colour and be applied as an economical spray, trowel or rolled-on finish, improving the overall performance, appearance and longevity of most wall surfaces. Fresco Textures can be used over many surfaces including Fresco Render, Fresco Skim, FC Sheets, Conventional cement renders, etc.
Top-coating Fresco Textures with a premium acrylic paint improves the texture coats durability and greatly reduces dirt pick-up.
Fresco Texture coats can be applied on interior as well as exterior surfaces that are suitably prepared.
|
|
Benefits
|
|
- Water Repellant
- Vapour permeable
- Flexible
- Low maintenance
- Extremely durable
- Marble aggravates
- Acrylic (water) based
- Spray, trowel or roll-on
|
|
Fresco Texture Coats can be applied to:
|
|
- Fresco Render
- Cement Render
- Hebel celcrete
- Fibre cement sheet
- Expanded polystyrene
- Aged brickwork
- Concrete blocks and bricks
- Clay bricks
- Tilt slab and off form concrete
|
|
Directions
|
|
-
All surfaces must be clean, sound and free from contaminants
- Create smooth substrate, repair cracks and imperfections and any large areas with Fresco Render
- Priming is recommended with Fresco Primer
- Check that colour is correct
- Mix the texture well, by hand stirrer using an uplifting motion, or mechanically using a power stirrer to set to slow
- Apply texture coat by spray, hawk & trowel or by roller
- Avoid using in windy conditions or temperatures outside 16ºC - 26ºC.
- Keep newly coated areas protected from rain and moisture for at least 12 hours, longer in lower temperatures.
|
|
Technical Data
|
|
- Appearance: White textured liquid
- Application: Spray, trowel or roller
- Resin Type: Acrylic emulsion
- Volume Solids: 50 – 70%
- Specific Gravity: 1.78 – 1.99 gm/cc (kg/lt)
- Dry time : 1-2 hrs @25ºC & 50 % relative humidity
- Texture re-coat : Not recommended
- Top-Coat: Minimum 24 hrs
- Finish: Matt – textured
- Durability : Extremely durable pigmented textured coating
- Flammability: Non- Flammable
Texture
Grade |
Coverage(approx)
Area m²(sqM) per litre |
Coverage (approx)
Area m²(sqM) per 15 litre pail |
| Roll-on Fine |
1.2 – 1.5 m²/lt |
18 – 22.5 m²/lt |
| Spray on Fine |
0.8 – 1.0 m²/lt |
12 – 15 m²/lt |
| Spray on Fine |
0.8 – 1.0 m²/lt |
12 – 15 m²/lt |
| Trowel on Fine |
0.66 – 1.0 m²/lt |
9.9 – 15 m²/lt |
| |
|
|
| Spray on Medium |
0.45 – 0.6 m²/lt |
6.75 – 9.0 m²/lt |
| Trowel on Medium |
0.5 – 0.6 m²/lt |
7.5 – 9.0 m²/lt |
|
FOR ANY TECHNICAL ADVICE PLEASE CONTACT US ON:
Tel: +64 09 415 8099
Fax: +64 09 415 8036
Email: info@fresco.net.nz
Website: www.fresco.net.nz
23 Schnapper Rock Road, Albany, Auckland
M.S.D.S. AVAILABLE ON REQUEST
|
|
