|
Fresco Sandstone
|
Sandstone’s flat finish gives a subtle and attractive colour variation, and is rapidly becoming the paint of choice by award-winning New Zealand architects.
Sandstone has a finely grained texture– smooth but tactile – and when used in conjunction with Hi-Build it’s waterproof! This amazingly versatile long-lasting paint is easy to apply with roller or brush, and may be used for interiors or exteriors. MORE

|
|
Fresco Tuscany
|
A cement-based paint with a patina evocative of Mediterranean textures. Tuscany’s tactile finish can be smooth, or feature the relief of brush-strokes. It gives a high level of protection with superior flexibility, resilience and easy application. Waterproofing can be achieved when used with Hi-Build Waterproofer. For exterior and interior use. MORE

|
|
Fresco Velvet
|
A choice of texture and appearance for a wide variety of exterior and interior requirements.Beautiful to look at - smooth and seductive to the touch. The ideal finish when you want the added visual interest of patina.
Fresco Velvet is a flat limewash for interiors, and for exteriors when used in conjunction with Fresco Hi-Build. It can be used very effectively to create a softer feel and character for modern décor, and is exceptionally well suited to use in older buildings and conservation projects. MORE

|
|
Fresco Tough-guy
|
A functional, wipe-able, all-purpose 100% low-sheen acrylic. Smooth to the touch – or you can have a fine grain added to give subtle texture. Great for high traffic areas, gib-board and trim, exterior timber and masonry, and available in the full Fresco colour range - and beyond MORE

|
|
Fresco Breathable Primer
|
A clear sealer specifically formulated for use in conjunction with Fresco Breathable on exterior plasters and cement mortars.
It stabilises the substrate, enhances adhesion and acts as a water barrier in the event of damage to the top coats.
MORE

|
|
Fresco Breathable - exciting new paint technology
|
This silicone/mineral plaster finish paint provides effective waterproofing – and because it breathes - it can prevent problems such as damp, rotting timbers, mould etc. in a variety of situations.
Fresco Breathable has extremely high moisture vapour transmission rates (MVTR), and excellent water repellent properties that minimise absorption into the substrate.
Fresco Breathable is available in either smooth or coarse textures across the full Fresco colour range – and looks fantastic!
MORE

|
|
Fresco Breathable Sealer
|
For when you want to preserve the natural look and achieve good weather protection. This high MVTR water-based sealer protects masonry or concrete surfaces (e.g. tilt-slab), giving a clear, colourless waterproof finish.
For use on exterior and interior surfaces. Reduces dirt pick-up and mould.
MORE

|
|
Fresco Hi-Build Waterproofer
|
An easy-to-use hi-build elastomeric (flexible) paint for use under Fresco Sandstone or Tuscany to take care of hairline cracking, and to waterproof masonry surfaces.
It can be used as a finish coat, and is available across the full Fresco colour range.
MORE

|
|
Fresco Undercoat
|
This scientifically developed base coat is recommended in the preparation of previously oil-painted surfaces, for gib-board, or surfaces in an unsound condition. MORE

|
|
Fresco Glaze
|
This clear acrylic sealer, available in flat, satin or gloss, can be applied over Fresco products to give even greater serviceability. Ideal for bathrooms, kitchens, playrooms and stairs.
Easy clean – and still allows full colour. MORE

|