Tough-Guy is a functional, wipe-able, all-purpose 100% acrylic available in either flat or low-sheen finish. Choose the finish - either smooth eggshell, or you can have a fine grain added to give subtle texture.
Marks wipe off Tough-Guy easily so it’s excellent for high traffic areas. Ideal on almost any surface including gib-board and trim, this versatile paint is available across the full Fresco colour range - and beyond.

Suitability

Tough-Guy is suitable for exterior and interior application. This amazingly versatile paint is suitable for almost any prepared surface including cement render, concrete, concrete blocks, bagging, clay, internal and external timber and exterior steel. It can be applied to previously painted surfaces, plaster and gib-board.

Preparation

Ensure surfaces are clean and sound. Sand surfaces previously painted with gloss. Use a similarly tinted undercoat prior to applying Fresco Tough-Guy.

Application

Roller or brush. Two coats required. Air temperature above 10oC, below 35oC. Water cleanup. Protect from rain or sub-zero temperatures for 24 hours after application.

Colour

Tough-Guy is available across the entire Fresco colour range, and can be tinted to match almost any colour. A tint surcharge applies.

Coverage

12 – 14 m2 per litre
Available in 1, 4 and 10 litres and test pots.

PLEASE CONTACT US AT FRESCO IF YOU HAVE ANY QUESTIONS ABOUT PREPARATION, COLOUR MATCHING OR APPLICATION.

FOR ANY TECHNICAL ADVICE PLEASE CONTACT US ON:

Tel: +64 09 415 8099
Fax: +64 09 415 8036
Email: info@fresco.net.nz
Website: www.fresco.net.nz
23 Schnapper Rock Road, Albany, Auckland